Menu Close menu
  • NOQDENT Omnium, the champagne-finish 5-axis dental milling machine, front three-quarter view
  • NOQDENT Omnium from the side, on a light blue backdrop
  • NOQDENT Omnium from the back, on a light blue backdrop

5-axis wet and dry milling

NOQDENT Omnium

Every material. One machine.

  • Wet & Dry

Finish: Champagne

Book a free test milling Specifications

Overview

From zirconia to titanium and CoCr, take every case in-house. A 2.25 kW spindle and Ø 6 mm tools handle heavy metal work, and a mineral-cast base keeps every cut steady.

Wet & dry

Wet and dry, one chamber.

Mill zirconia and wax dry, then titanium, CoCr, ceramics and PMMA wet, without changing machines. The air curtain shares one outlet for dust and water, so switching needs no extra setup.

Dry

  • Zirconia
  • Wax

Wet

  • Titanium
  • CoCr
  • Glass ceramic
  • Hybrid ceramic
  • PMMA
  • Abutment blanks

Wet milling uses one external coolant tank.

Clean air

Clean chamber, wet or dry.

An air curtain and built-in dust extraction keep zirconia out of the milling area, and filtration keeps your coolant clean. Less cleanup between jobs, whatever you mill.

Design

Built to stand out.

Close-up of Omnium's brushed champagne side panel with the NOQDENT and OMNIUM lettering

A brushed-champagne body, clean lines and a window onto every job. Omnium looks as solid as it mills.

ChampagneOmnium

Milling dry only? Discover Punctum
Inside the milling chamber: a white disc in its holder

Cooling and clean air, built in.

Built in

Built in, not bolted on.

Cooling, air, dust extraction and control live inside the machine. Wet milling adds one external coolant tank.

  • Mineral-cast base

    Absorbs vibration and resists heat, for a steady cut.

  • Built-in cooling

    The 2.25 kW spindle is water-cooled inside the machine. No external chiller.

  • Clean-air system

    Air curtain and dust extraction, built in. No external vacuum.

  • Built-in air

    No external compressor to buy, connect or maintain.

A white disc clamped in the holder on the rotary axes of the machine

Full 5-axis reach

Five axes reach undercuts and angled screw channels in one setup. Quick-change holders make every changeover fast.

The front door of the machine folded open, showing the lit milling chamber

An easy-access chamber

Open the door and the holder and tools are right in front of you.

Wet milling, filtered

Filtration catches chips and debris, so your coolant stays clean longer.

The closed tool carousel, its tools held around the rim

Tools registered by RFID

Each Ø 6 mm tool is registered by RFID and kept in a closed 24-position carousel, so the machine always knows which tool sits where.

The control screen: axis positions, the G-code program, and the run, pause and abort buttons

Touch-screen control

Start, follow and manage every job from the touch screen.

The spindle on its mounting plate inside the machine, a tool in its chuck

Power for metal

A 2.25 kW water-cooled spindle at up to 80,000 rpm, with Ø 6 mm tools for titanium and CoCr.

Turn and mill in one

A single-piece holder for one block or abutment blank rotates without limit, so Omnium turns and mills in one setup and finishes faster.

In action

See it mill.

Real footage from the chamber: automatic tool change, 5-axis milling and the finished part.

Close-up of the machine's top cover with its green progress light

The essentials, in numbers.

  • 2.25 kWSpindle power for titanium and CoCr.
  • ±3 µmRepeatability, for restorations that fit the first time.
  • 24 toolsIn a closed RFID carousel, ready for long runs.
  • 8 yearsWarranty on the complete machine, spindle included.

Materials

What it mills.

Zirconia and wax dry; titanium, CoCr, glass ceramic, hybrid ceramic, PMMA and abutment blanks wet.

Dry milling

  • Zirconia
  • Wax

Wet milling

With the external coolant tank

  • Titanium
  • CoCr
  • Glass ceramic
  • Hybrid ceramic
  • PMMA
  • Abutment blanks

Blocks and abutment blanks

Wet, three at a time or one by one

Mill glass ceramic and hybrid ceramic blocks, or abutment blanks, three at a time in a C-clamp holder that tilts up to 90° to reach every detail. For single pieces, the turn-mill holder rotates endlessly and finishes faster.

Three blocks on their mandrels in the NOQDENT C-clamp holder

What you can make.

  • Zirconia

    Dry
    • Crowns
    • Bridges
    • Copings

  • Wax

    Dry
    • Casting and press patterns

  • PMMA

    Wet
    • Temporaries
    • Try-ins
    • Bite splints

  • Glass ceramic (blocks)

    Wet
    • Inlays & onlays
    • Veneers
    • Crowns

  • Hybrid ceramic (blocks)

    Wet
    • Inlays & onlays
    • Crowns

  • Titanium

    Wet
    • Custom abutments
    • Bars
    • Frameworks

  • CoCr

    Wet
    • Frameworks
    • Bars
    • Copings

  • Abutment blanks

    Wet
    • Custom abutments

Included with every NOQDENT.

  • MillBox CAM

    Professional CAM software, in the package.

  • Installation & training

    We set up your system and train your team.

  • 8-year warranty

    The complete machine, spindle included.

  • Support within 4 hours

    Business hours, across Egypt and MENA.

Specifications

Technical specifications.

Axes
5
Milling
Wet & dry
Spindle
2.25 kW, water-cooled, up to 80,000 rpm
Repeatability
±3 µm
Absolute accuracy
±5 µm
Tool changer
24 positions, RFID
Tool shank
Ø 6 mm
Holders
Quick-change disc holder · C-clamp holder (3 blocks or abutment blanks, up to 90°) · Turn-mill holder (1 block or abutment blank, endless rotation)
Disc format
Ø 98.5 mm, up to 40 mm thick
Materials
Dry: zirconia · wax. Wet: titanium · CoCr · glass ceramic · hybrid ceramic · PMMA · abutment blanks
Built in
Cooling · air · dust extraction · coolant filtration
Wet milling
One external coolant tank
Machine base
Mineral cast
Footprint (L × W × H)
800 × 720 × 720 mm
CAM
MillBox included, open to any dental CAD
Warranty
8 years, spindle included

Need more figures?

Our team will send you what you need.

Contact us

The range

Choose your NOQDENT.

See all three
A man in a white shirt, smiling.

Ready to mill in-house?

Book a free test milling