NOQDENT: 5-axis dental milling machines
Dry precision, lab or clinic.
NOQDENT Punctum
5-axis dry milling · Lab and Clinic
Mill zirconia, PMMA and wax in your own lab or practice. Cooling and dust extraction are built in, so you start without extra units.
Every material. One machine.
NOQDENT Omnium
5-axis wet and dry milling
From zirconia to titanium and CoCr, take every case in-house. Wet and dry milling in one machine, with no external chiller.
Your lab's night shift.
NOQDENT Continuum
Automated cell for three or more mills
One robot loads blanks and unloads finished discs across three or more NOQDENT mills, so your lab keeps producing between shifts.
Features
Inside NOQDENT
Scroll through Omnium, part by part: from the touch screen to the mineral-cast base.
Features
01 Control. One touch away: a guided touch screen walks you through every job, from tool selection to START.
02 Spindle. Sharp margins, smooth surfaces: a stable high-speed spindle means less polishing and fewer remakes.
03 Tools. Scan it, load it, done: each tool registers itself by RFID and waits in a closed carousel, protected from dust.
04 5-axis. Full reach, every angle: five axes reach undercuts and angled screw channels in one setup. Quick-change holders on Punctum Lab and Omnium cut setup time further.
05 Wet milling, Omnium. Clean coolant, clean results: filtration catches chips and debris, so your coolant stays clean longer.
06 Clean air. No dust buildup: an air curtain and built-in dust extraction keep zirconia out of the milling area. On Omnium, the same outlet handles water too, so switching between wet and dry needs no extra setup.
07 Cooling. No chiller needed: the spindle is cooled inside the machine. There is no external chiller to buy, place or maintain.
08 Foundation. Steady under every cut: a mineral-cast base absorbs vibration and resists heat, so accuracy holds from the first crown to the last.
09 Access. Open, load, close: easy access to the milling chamber makes loading and cleaning quick.
Materials
What NOQDENT can mill
Pick a machine, then a material, to see whether it's milled dry or wet.
Omnium
- ZirconiaDry
- WaxDry
- PMMAWet
- Glass ceramicWet
- Hybrid ceramicWet
- TitaniumWet
- CoCrWet
- Abutment blanksWet
- BlocksWet
How it works
Four steps, start to finish.
The touch screen guides you through each one.
- Choose your tools on screen
- Load the tools
- Load the disc
- Press START
Digital workflow
Mill it on NOQDENT
Punctum mills zirconia, PMMA and wax dry. Omnium adds titanium, CoCr, ceramics and PMMA wet.
- Punctum DryZirconiaPMMAWax
- Omnium DryZirconiaWax
- Omnium WetTitaniumCoCrGlass ceramicHybrid ceramicPMMAAbutment blanks
NOQDENT in numbers
What you get, at a glance.
-
8 Years of warranty
Your complete machine is covered for eight years, spindle included.
-
4 h Support response
We respond within four hours in business hours, across Egypt and MENA.
-
0 External units
No chiller, no compressor, no vacuum. Plug in and mill.
-
All Dental materials
Zirconia, PMMA, wax, glass and hybrid ceramics, titanium and CoCr: Omnium mills them all.
